How to change the file system of the disk or flash drive without formatting

Modern mobile devices, as a rule, can only work with flash drives and discs in FAT32 and are not compatible with the NTFS file system. At the same time, Windows on the contrary prefers exactly the last format on the media used with it (with the exception of loading flash drives). How to change the file system of the disk or flash drive without formatting

You can quickly change the file system from FAT or FAT32 to NTFS without media formatting and deleting files from it. This may be required, for example, to record a large file file (more than 4 GB). Recall that the FAT32 file system allows you to work with files whose size does not exceed 4 GB.

You can convert the file system using a special command in Windows. To do this, insert the media into the USB port of the computer and after its initialization in the system, look in the conductor letter, which is assigned to your flash drive or external HDD.

After that, run the command prompt by pressing Win + R and typing in the CMD query field. A command prompt window will open, in which you need to dial:

Convert J: / FS: NTFS

- Where J is the letter of your media disk (you may have another), on which the file system is converted.

And press ENTER. The conversion process will start.

How to change the file system of the disk or flash drive without formattingIt is worth noting that when converting a file system from FAT to NTFS, a new table of contents is created on the media (Master File Table - MFT) in another area of ​​the disk. Therefore, the transformed volume has a slightly smaller speed than if the disk was immediately formatted in NTFS.

How to change the file system of the disk or flash drive without formattingIt would be convenient if you could also make an inverse conversion from NTFS in FAT32 without formatting. But alas, such a possibility of Windows does not provide. Perhaps this is due to the protection of user data: after all, the disk can contain a volume of more than 4 GB, and then the system cannot provide access to it.

By the way, if you have not yet purchased a universal USB flash drive, which can be connected to a computer and to a smartphone, including with a USB Type-C connector, then we recommend to look at the Silicon Power Mobile C50 32GB model with USB 3.0 interface.

How to change the file system of the flash drive or SSD disk from NTFS in FAT32 so that it can be connected to the smartphone? Embedded Windows tools for large-volume media does not succeed. Chip will tell, with what utility it can be done quickly and without problems in the next council.

See also:

A photo: Manufacturers, Andrey Kireev

Change the file system on the flash drive with FAT32 on NTFS

FAT32 and NTFS are the most common file systems on information media in Windows Family Operating Systems. In most cases, immediately when buying a flash drive is converted to FAT32 file system. But very often, for example, to record a file of more than 4 GB, it is required to change it to more modern - NTFS. How to do this you will learn in this article.

Change with full flash drive

There are two ways. The first - with the full deletion of all the contents and the second - with the preservation of all data on the flash drive.

Running forward immediately note that if possible, it is better to use exactly the first way that will be described below. Since during the conversion without deleting data, errors and even the complete arrival in the disrepair of the entire contents are possible.

Attention! This method will remove everything that is on the flash drive and according to the result it will be clean. Consider this and if you need to copy all the contents on the hard disk, and return it back after conversion.

  • Insert the USB flash drive in the USB port of the computer or laptop;
  • In the My Computer window, where all local and interchangeable discs are displayed, find your flash drive, click on it right mouse button and select "Format".
how to change the file system with FAT32 on NTFS on the flash drive

Start formatting flash drive

  • In the window that opens in front of the file system string, select NTFS;
FAT32 in NTFS on flash drive

Change FAT32 on NTFS through formatting

  • Please note that the checkbox has been installed "Fast (Cleaning Table of Contents)";
  • Click on the "Start" button.

The formatting process will start, which will be completed literally after a few seconds. According to the result, your flash drive will be completely cleaned and converted to the NTFS file system.

Changing the file system on the flash drive without deleting data

As already described above, it is recommended to resort to this method only when copying data from the flash drive has once and has nowhere.

Also before using the method described below, it is better to check the flash drive for errors. To do this, in the "Computer" window, click on the flash drive with the right mouse button and select "Properties".

How to change the file system with FAT32 on the flash drive on NTFS?

Properties flash drive

Then go to the "SERVICE" tab and click "Check".

FAT32 in NTFS on flash drive

Start checking flash drives for errors

Upon completion, follow the steps below.

  • Insert a USB flash drive in the USB port of a computer or laptop;
  • Open the command line on behalf of the administrator;
  • Digit the command convert {letter_disc} / FS: NTFS, Where you need to specify the letter of your flash drive, under which it has decided on the computer. For example, this is the letter F. Then the file system change command on the flash drive without losing data will look like this: Convert F: / FS: NTFS
How to change the file system with FAT32 on the flash drive on NTFS?

Conversion command from FAT32 in NTFS without data loss

  • Press ENTER on the keyboard. Further, the bad is proposed to set the Tom label. It is better not to enter anything and leave the field to enter empty. Once again press ENTER.
FAT32 in NTFS on flash drive

Conversion process and its completion

The conversion process will start, which will be completed with the corresponding message.

how to change the file system flash drive

We will analyze the question of how to change the file system of the CFAT32 flash drive on NTFS, but not losing important data on the carrier.

Most often, when buying a flash drive, we get it in the file standard system for external devices, it is in FAT32 format.

Content:

Why change the file system flash drive

When operating the device, it is quite often possible to change the file system of the flash drive to a more modern NTFS format.

You can call at least two significant reasons why there is a need for a flash drive system to change:

  1. The use of NTFS will undoubtedly affect the speed of the flash drive, since this format is more speed.
  2. The NTFS system will be needed to record a large file - more than 4 GB. The FAT32 system does not allow it to do.

Of course, the easiest way to copy the entire contents of the flash drive is a robust medium of information, and the flash drive itself format.

But there may be a situation where there are some important data on the flash drive and it is impossible to format it. To transfer these important data at the moment can be nowhere.

How to change file system flash drive tools

That is, the question is worth it - how to change the file system, but the important data on the carrier is kept.

Consider how it is to execute it in Windows 7 without using third-party programs using the built-in utility - convert.exe.

The utility has no graphical interface, so you have to use the command line.

Press Start , in the field row Find programs and files We write a team - cmd. . At the top of the window will appear this inscription cmd.exe. .

Select a command line

Right-hand mouse click on it and in context find - Run on the name of the administrator .

Running the command line

The command line is launched. Next operation is a call to the Convert function. And then you should specify a flash drive to which file system. The team will look as follows:

Convert (letter assigned to flash drive) / FS: NTFS

Here you need to specify the letter of the flash drive, under which it is defined on the computer.

To do this, open A computer And we see what the letter is fixed behind the connected flash drive. In this case, this is the letter H.

Letter flash drive

Therefore, in the command line, specify the letter H. Next, we put the colon, space, lay, FS, colon. Next, specify which file system you need to convert a flash drive, that is, in this case - NTFS. As a result, the team will be recorded like this:

Convert H: / FS: NTFS

Command to change file system flash drive

Zhmem. ENTER . There will be a proposal to set the Tom label, we do not put anything. Press again ENTER And the conversion process is launched.

We are waiting for a while. Conversion ends with a message that the conversion is completed.

As a result, the data on the flash drive is saved, and the file system is obtained on the flash drive to change.

Terms of successful conversion

In order for the conversion process to be successful, it is necessary to observe the environment:

  • Before converting a flash drive must be closed.
  • To change the successfully file system of the flash drive, you must have a certain free space on it. Therefore, if there is too much data on the flash drive, it may be necessary to remove something or moved to the hard disk.
  • Another point that is recommended to take into account the next one. Before the conversion process, not to lose some data, it is desirable to check the flash drive for errors.
  • In this case, the flash drive file system turns out to be changed without loss of data. But after all, if there are really important data on the flash drive, it is recommended to make a backup copy of important files and save them to a hard disk.
Check flash drives on errors when changing the file system

Check File System Flashki

Close the window open A computer , Check the files on the flash drive and make sure everything is in order. All our files remained intact without deletion.

Now check how the file system has changed. Open Properties The connected flash drive and observe that the media file system has changed on NTFS.

This procedure is irreversible. That is, the file system given by the command can be changed on the flash drive only in one direction.

To change the file system with NTFS format in FAT32, you have to format a flash drive.

Here is such a simple command makes it possible to change the file system with a regular Windows utility file without using third-party programs.

FAT32 file system, from which most flash drives are sold, has a number of restrictions that can create inconvenience to users. For example, the maximum file size that this file system supports is only 4 GB.

In order to solve this problem, the USB flash drive must be reformatted from the outdated FAT32 file system to more modern NTFS, in which there are no serious restrictions. And in this article we will look at three ways at once, as can be done.

Reformatting a flash drive from FAT32 to NTFS through the context menu

If you want to simply reformat from FAT32 and NTFS, then this can be done in two ways. The first method is formatting through the context menu of the flash drive. This method is the simplest and suitable for most users.

In order to reformat the USB flash drive in NTFS using this method, you need to open the My Computer window and right-click on the flash drive, then in the menu that opens, you need to select "Format".

Item format in context menu

As a result, a window appears to reformat the flash drive. In this window, you need to change the file system with FAT32 on NTFS. The remaining formatting settings can be left standard.

Selecting a file system in the formatting window

To start the process of reformatting a flash drive, you need to click on the "Start" button.

Launch formatting

After that, a window will appear with a warning that the reformatting of the flash drive in NTFS will delete all the data. To continue close this window using the OK button. Next will need to wait until formatting is over. Usually it goes no more than 1 minute. When formatting a flash drive is completed, the operating system will inform you about it.

Reformatting a flash drive from FAT32 to NTFS via CMD

Also reformatting from FAT32 and NTFS can be performed using the "command line". To do this, first click the Win + R key combination and execute the "CMD" command. So you will open the "Command Line".

After opening a "command line", you need to execute the command to reformat the flash drive. This command looks like this:

  • Format N: / FS: NTFS / Q / V: MyFlash

Where

  • N: - Letter, which is assigned to your flash drive;
  • / FS: NTFS - file system;
  • / Q - fast formatting;
  • / V: MyFlash - Tom Tag (Your flash drive name);

In the screenshot below, it is shown how this command looks in the "command line".

Format command on the command prompt

After executing this command, the system will ask you to press the ENTER key on the keyboard in order to confirm formatting.

Format execution command

After pressing the ENTER system will start the process of reformatting a flash drive from FAT32 and NTFS.

Reformatting a flash drive from FAT32 to NTFS without data loss

It is also possible to reformatting from FAT32 and NTFS without data loss. It is also done in the "command line", but already with the help of another team. To do this, use the following command:

Where:

  • N: - Letter, which is assigned to your flash drive;
  • / FS: NTFS - file system;

In the screenshot below, it is shown how this command looks in the "command line".

execution of the convert command

After executing the Convert command, the FAT32 file system conversion process is launched into the NTFS file system. In this case, all data on the flash drive is saved. The conversion process takes longer than the usual formatting so be prepared to wait a while.

"How to change the file system." I bring to your attention a learning article that will teach you to change the file system of the disk or flash drive.

First, why do you need?! During the application of various data storage devices, the need for replacement on the file system. Due to the fact that, for example, Fat32 does not support the volumes of 4 GB, for which it will have to be changed to another (NTFS). I will add another FAT32 very not stable file system . And with a sharp pulling off the flash drive, you can lose data from USB drive

How to change the file system
How to change the file system

File system can be changed in 2 ways

Formatting

A rather popular order at which the location of the drive occurs to place the necessary information. IN Windows Communicated by control in the dialog box. It is necessary to find " Format »In the context menu by pressing the PCM on the connected device icon. In the window that opens, it is proposed to define the desired file system, formatting option, cluster (large or small size). Click "format" and the flash drive will be cleared of everything that it contained, and at the same time will get another FS. Minus, as you noticed, in what all information disappears.

Conversion

Less well-known way. Although, in contrast, from the previous one there is a plus - data on the carrier is saved. That is, after the conversion will pass Without data loss . Nevertheless, I recommend to leave copies of the necessary documents just in case. This process can be performed by resorting to the standard Windows utility. She does not have a graphical interface, functions in text mode. To change the system, one of the ways to open the command line are one way:

  • Press the combination Hot keys Win + R write cmd. In the "Run" window (Start menu)
  • Or so "Start - All Programs - Standard", then "Command String"

Without starting converting, you should close the programs that use Files on a flash drive . Otherwise, the process is not executed, but it will be proposed forced to disable volume. I also advise you to check the disk for the presence of errors.

So, by closing the program, cutting off access to files, you need to enter a command to convert:

Convert [Disc Name]: / FS: NTFS

File System Change Team C FAT in NTFS
File System Change Team C FAT in NTFS
Where the name of the disk is to enter the name of the connected volume without brackets. Letters. For example: D, E, F, G.

Next press ENTER. You will be asked to drive the Tom labeled - the word on Latinica. In the way the system changes on Flashke , Railway, system division. Windows provides the opportunity to change FAT32 on NTFS. Only not the opposite.

If you need functionality, you will find it in:

  • Partition Magic.
  • Acronis Disk Director.
  • Paragon Partition Manager

These utilities will be able to convert NTFS в FAT32. And besides creating other.

How to change the file system on the flash drive

Do you know that the type of file system affects the capabilities of your flash drive? So under FAT32, the maximum file size can be 4 GB, with larger files only the NTFS system works. And if the flash drive has EXT-2 format, it will not work in Windows. Therefore, some users have a question about changing the file system on the flash drive.

How to change the file system on the flash drive

This can be done by several fairly simple ways. Some of them are to use standard tools of the operating system, and to use others you need to download additional software. But everything is in order.

Method 1: HP USB Disk Storage Format

This utility is easy to use and helps in cases where the usual formatting of Windows does not work due to the wear of the flash drive.

Before using the utility, be sure to save the necessary information from the flash drive to another device. And then do this:

  1. Install the HP USB Disk Storage Format utility.
  2. Connect your drive to the computer's USB connector.
  3. Run the program.
  4. HP USB Disk Storage Format window

  5. In the main window in the field "Device" Check that your flash drive is displayed. Be careful, and if you are connected to several USB devices, do not make mistakes. Select in the field "FILE SYSTEM" The desired view of the file system: "NTFS" or "FAT / FAT32" .
  6. Put a tick near the row Quick Format For quick formatting.
  7. Press the button "Start" .
  8. A window will appear with a warning about the destruction of data on a removable drive.
  9. Warning when using HP USB Disk Storage Format

  10. In the window that appears, click "Yes" . Wait for the end of formatting.
  11. Close all windows after this process is completed.

See also: Check the real flash drive speed

Method 2: Standard Formatting

Before performing any operations, perform a simple action: if the drive contains the necessary information, then copy it to another media. Next do the following:

  1. Open the folder "A computer" , Right-click on the image of the flash drive.
  2. In the menu that opens select the item "Format" .
  3. Formatting through the standard media formatting media

  4. The formatting window opens. Fill in the required fields:
    • "File system" - The default file system is specified. "FAT32" , change it to the desired;
    • "Cluster size" - the value is set automatically, but if desired, you can change;
    • "Restore default parameters" - allows you to reset the established values;
    • "Tom Mark" - the symbolic name of the flash drive, not necessarily set;
    • "Fast Cleaning Table of Contents" - Designed for quick formatting, it is recommended to use this mode when formatting removable information carriers with a volume of over16 GB.
  5. Standard formatting window

  6. Press the button "To begin" .
  7. A window will open with a warning about the destruction of data on the flash drive. Since the necessary files are saved, click "OK" .
  8. Warning at formatting

  9. Wait for the formatting. As a result, a window will appear with the completion notification.

Completion of formattingThat's all, the formatting process, and accordingly, changes in the file system, finished!

See also: How to record music on a flash drive to read it tape recorder

Method 3: CONVERT utility

This utility allows you to correct the type of file system on a USB carrier without destruction of information. It is included with the composition of the Windows OS and called via the command line.

  1. Press the key combination "Win" + "R" .
  2. Dial the command cmd. .
  3. In the console appeared, type Convert F: / FS: NTFS where F- letter notation of your drive, and FS: NTFS - The parameter denoting that we will convert to the NTFS file system.
  4. Convert Command in Windows Console

  5. At the end, a message will appear "Transformation Completed" .

As a result, get a flash drive with a new file system.

If you need a reverse process: change the file system from NTFS in FAT32, then you need to dial on the command line.

Convert G: / Fs: NTFS / NOSECURITY / X

There are some features when working with this method. This is what:

  1. It is recommended to check the drive for errors before conversion. This is required to avoid errors. "SRC" When performing the utility.
  2. To convert, you need to have free space on the flash drive, otherwise the process will stop and message will appear. "... not enough space on the disk to convert the transformation faction F: It was not transformed into NTFS" .
  3. If there are applications that require registration on the flash drive, then most likely the registration will disappear. When converting from NTFS to FAT32 defragmentation will be time consuming.

Having understood in file systems, you can easily change them on the flash drive. And the problem when the user cannot download a movie in HD quality or an old device does not support the format of a modern USB carrier, will be solved. Good luck in job!

See also: How to protect a flash drive from recording

CloseWe are glad that you could help you solve the problem. CloseDescribe what you did not work.

Our specialists will try to answer as quickly as possible.

Will this article help you?

WELL NO

How to change FAT32 on NTFS on a flash drive, hard disk or SSD without data loss

Advertising

& NBSP Windows | for beginners

Convert USB flash drive or disk from FAT32 to NTFSIf for any reason, for example, due to the limit on the file size in the FAT32 file system, you needed to convert a flash drive, partition on the hard disk or SSD from FAT32 in NTFS without losing data and formatting, to make it very simple and can be done by built-in tools. Windows 10, 8.1 or Windows 7.

In this instruction detailed how to change the FAT32 file system on NTFS on a flash drive, hard disk or SSD so that all data on it remains intact. In the context of the topic under consideration, it may be useful: FAT32 or NTFS - which file system is better for a flash drive.

Conversion of the file system from FAT32 in NTFS

In order to convert the disk file system, flash drive or other drive from FAT32 to NTFS in Windows 10, 8.1 and Windows 7 there is a built-in utility of the command line, which is called convert.exe. How to use it:

  1. Run the command prompt on behalf of the administrator. In Windows 10, this can be done using the search in the taskbar (type "Command Line", and then select the "Startup from the administrator" item or press the right-click on the command line and select the same item). Other ways are described here: how to run the command line on behalf of the administrator. Run a command line from the administrator
  2. This step is not required, but I recommend it to do before you begin to convert FAT32 to NTFS. Enter the command (replace the letter D: on the drive letter, which is required to be changed): CHKDSK D: / F And press ENTER. In the example, on the screenshot of the letter convertible flash drive is different. Disk check before conversion
  3. After checking the disk on errors, enter the command (also replacing the drive letter to your): Convert D: / FS: NTFS Change FAT32 in NTFS without formatting
  4. Wait for the conversion to complete. Consider that he can take a long time on slow hard drives. At the end of the process, you will receive a message that the file system conversion is completed.

This will be completed on this process, and the file system on the flash drive, disk or any other drive will be NTFS instead of FAT32.

Video instruction

Additional Information

At the end of several additional points, the knowledge of which can be useful when changing the file system:

  • In order to change FAT32 on NTFS on a flash drive or disk should be free space. The amount of the required location for the conversion is displayed when executing the command on the 3rd step.
  • If you want to make sure that the file system has changed, you can use methods from the instructions how to find out the file system on the hard disk, SSD or USB flash drive.
  • If you do not need data on the drive, you can simply format it in NTFS using steps from the article how to format a USB flash drive in NTFS.

And what if it will be interesting:

Very often there are situations when you need from a hard disk to move or copy the large volume file to the external drive.

Sometimes for the flash drive you need to change the file system to load the desired large file file.

With a standard file system for external devices FAT32, file transmission from 2GB is often impossible. You can solve this problem in two ways:

  • Format a flash drive with changing the final file system.
  • Change the file system through the command line.

Changing the file system with device formatting

In the first case, you should transfer all the data from the flash drive to the hard disk to save them. This method is suitable for low-volume devices. To change the file system, make several operations:

Insert a USB device into the required port.

Open the "Computer" and the right mouse button to click on the external device to the "Format" tab.

You need to press the right mouse button on the disk.

You need to press the right mouse button on the disk.

In the File System, you need to select the NTFS item and click "format".

Before the format process, be sure to transfer files to avoid their loss.

Before the format process, be sure to transfer files to avoid their loss.

After the procedure, you will receive a fully cleaned disk with a new file system. You can record a file of any size on such a device.

Video instructions for changing the file system by formatting

Conversion via command line

In order to start the conversion, you must start the command line. To do this, you need to open the "Start" menu and the search string enter CMD. There is one file to run.

For further convenience, it is still worth running the process on behalf of the administrator.

For further convenience, it is still worth running the process on behalf of the administrator.

Now the command line is running before you. It is desirable to conduct the process on behalf of the administrator. The next operation will be a call to the Convert function by indicating the desired file system.

You will appear in front of you in which you want to enter the data below.

You will appear in front of you in which you want to enter the data below.

You need to enter a convert G / FS: NTFS and press ENTER to start the conversion process.

G - disc, the file system you want to change.

The entry in the command line window is as follows.

Record to change the disk file system.

Record to change the disk file system.

Some operating systems can pop up a message about changing the name of the device. In the absence of the cumulative device, the conversion problems may occur less.

This is where the process of changing the file system.

This is where the process of changing the file system.

The conversion process takes no more than a minute for a device in 16 GB.

After completing the conversion, you can make sure that all files are saved in their places.

Video instruction on changing the file system via the command line

How to convert a system from NTFS to FAT32

In the case of formatting a flash drive, the process is absolutely identical, you just need to select a suitable file system.

When converted through the command line, the user needs to be entered on the command prompt

Convert G: / Fs: NTFS / NOSECURITY / X

For a successful completion of the conversion process, it is better to check the disk for errors. To do this, in the "Properties" of the disc, you need to find the item "Check errors".

To exclude problems with changing the file system format, it is better to check the drive for errors.

To exclude problems with changing the file system format, it is better to check the drive for errors.

With this method, fragmentation of files will affect the speed of the device. She will decrease a little. If there are applications that require registrations, then the registration data will most likely disappear.

Conversion by HP USB Disk Format Tool program

A small program will help format the USB flash drive, as well as help in its recovery. With it, you can create and bootable flash drives. You can download it here: http://www.besplatnoprogrammy.ru/hp-usb-disk-storage-format-tool . After downloading, you need to unpack the archive and run the program on behalf of the administrator.

The program window looks identically to the medium from Windows.

The program window looks identically to the medium from Windows.

Then you need to insert a USB flash drive and select the appropriate file system. The conversion process is almost identical to the first method of Windows. Enough to press the start and the program will start changing the format of the file system.

The end message looks like this.

The end message looks like this.

Despite the convenience of the conversion method via the command line, it is better to carry out normal formatting and transfer files. So you can avoid errors and random data loss.

A source

Created: 10.09.2020   Updated: 28.01.2021 22:42:39

By default, manufacturers are used in flash drives FAT32 file system. It is not the most perfect, has limitations on the size of the recorded file, but it is fully compatible with all modern operating systems. Our experts tell how to change the file system of the flash drive system to more comfortable.

Formatting

Formatting the easiest and most familiar option of changing the file system of the drive. You can perform it in the graphical interface of the operating system or using the command line.

Conductor menu

By connecting a flash drive to a PC, open the conductor. Click on the area with a graphical representation with the right mouse button, turning the context menu. Choose in it marked by a two-point item.

A window opens with disk formatting dialog. Click on the specified arrow string causing the menu of available file systems. By default, the user has the ability to choose between FAT32, EXFAT and NTFS. The exfat file system is optimized for FAT flash drives. Labor restrictions on the size of the recorded file, it also has a function of reducing wear of memory cells. By setting the type of FS with a selected frame button "Start".

Confirm the execution of the operation in the pop-up window, at the same time agreeing with the destruction of all available on the flash drive and unsaved data.

Having received a system notice, close it and can use the drive with the already modified file system.

The type of FS used can be found in the flash drive properties on the General tab. In the screenshot, the information line is highlighted by a green marker and is indicated by an arrow.

Command line

Call the advanced menu "Start" by the "Win + X" keys. Run the default command line shell installed. The described sequence of operations in the same way works in the classical CMD interpreter.

We recruit the "Format X: / FS: EXFAT / Q" in the invitation string. Instead of "x", specify the letter assigned to the flash drive by the system when connected. File system Select between FAT32, NTFS or EXFAT. The "/ Q" option allows quick formatting. The following screenshot shows an example of a command. The operation is performed for the drive with a LITERA "F", and EXFAT is selected as the destination system.

By pressing the ENTER key to start the command, the system will request to insert the disk into the "F" drive. I ignore this notice that remains from the old versions of Windows. Click the input key again.

In the region, the current and future file systems of the flash drive are displayed in the region. In the next step, the system will ask you to specify the volume label. We recruit it in the line specified by the "2" digit and press the ENTER again.

On the completion of the operation, the system reports the row of the specified arrow. Below it provides official information about the volume of free space, the number and size of clusters.

PowerShell

To use the PowerShell cmdlets to format the drive, launch the shell in elevated privileges mode.

GET-DISK in the invitation string. By pressing the input key in the console window displays a list of disks connected to a computer. At the next screen, the Kingstone flash drive is indicated by the arrow.

We enter a command that cleans the data from the connected USB drive: "Clear-Disk -Number 2 -Removedata". The number for the key "Number" take from the specified row arrow in the list of disks.

The execution of the requested operation requires an additional confirmation user. We enter in the Latin letter "Y" in the specified arrow. By pressing the input key, all data and partition table on the disk are erased.

Create a new partition table on the cleaned flash drive. We recruit the "New-Partition -Disknumber 2 -Usemaximumsize -isactive -DRiveletter F". In the "DiskNumber" key, we specify the sequence number of the disk used in the cleaning command - "2". The "Driveletter" option allows you to assign a letter to the letter with which it will be displayed in the conductor. Our experts have chosen "F", which is previously automatically assigned to Windows.

The disk initialization command will result in its re-definition by the system. A pop-up window will appear with the proposal to format in the OS graphical interface. Close it to continue working in PowerShell.

In the Console window, the number "1" shows a report on the creation of a new partition table. We enter the Format-Volume -DRiveletter F -FileSystem Exfat -NewFileSystemLabel Kingstone media formatting command. In the key "Driveletter" we indicate the letter of the Latin alphabet assigned to the flash drive. Specify the file system by the "FileSystem" option by selecting between FAT32, EXFAT and NTFS. Using the last key, set the volume tag. In the example above - "Kingstone". Press ENTER running it.

The final formatting result of the flash drive is displayed in tabular window.

Conversion

Conversion Allows you to change the FAT32 USB drive system on NTFS without destroying data available on it.

We launch the command line shell in elevated privileges discussed above. We type in the invitation string "Convert F: / FS: NTFS" and press the input key. The letter "F" used in the example is replaced by the assigned flash drive when it is connected to the PC.

The following screen shot shows a complete output of the service information accompanying the process of converting the file system. The arrow marked a report on the successful implementation of the requested operation.

Finally

Our experts described in detail several ways to change the file system of the flash drive, including the preservation of data recorded on it. Choose the most suitable and use, based on the instructions.

Evaluate Article.

Total votes: 0Rating: 0

Leave a Reply

Close